[CF] 3D Print Lab
Publications
330 found
Show per page
Mohos, Peter et al. (2026) ‘Disseminated Nocardia paucivorans infection in a 64-year-old patient with first manifestation as an ulnocarpal forearm lesion’, Case Reports in Plastic Surgery and Hand Surgery. 28.03.2026, 13(1). Available at: https://doi.org/10.1080/23320885.2026.2643076.
Mohos, Peter et al. (2026) ‘Disseminated Nocardia paucivorans infection in a 64-year-old patient with first manifestation as an ulnocarpal forearm lesion’, Case Reports in Plastic Surgery and Hand Surgery. 28.03.2026, 13(1). Available at: https://doi.org/10.1080/23320885.2026.2643076.
Tourbier, C. et al. (2026) ‘Biomimetic 3D-printed gyroid scaffolds with versatile bioactive coatings for complex craniomaxillofacial bone regeneration’, Biomedical Materials [Preprint]. Available at: https://doi.org/10.1088/1748-605x/ae55ed.
Tourbier, C. et al. (2026) ‘Biomimetic 3D-printed gyroid scaffolds with versatile bioactive coatings for complex craniomaxillofacial bone regeneration’, Biomedical Materials [Preprint]. Available at: https://doi.org/10.1088/1748-605x/ae55ed.
Zimmerer, R.M. et al. (2026) ‘A Prospective, International, Multicentre Registry of Patients Undergoing Segmental Mandibular Defect Reconstruction After Mandibular Resection for Tumours and Drug-Induced Osteonecrosis: A Study Protocol’, Craniomaxillofacial Trauma & Reconstruction, 19(1), p. 17. Available at: https://doi.org/10.3390/cmtr19010017.
Zimmerer, R.M. et al. (2026) ‘A Prospective, International, Multicentre Registry of Patients Undergoing Segmental Mandibular Defect Reconstruction After Mandibular Resection for Tumours and Drug-Induced Osteonecrosis: A Study Protocol’, Craniomaxillofacial Trauma & Reconstruction, 19(1), p. 17. Available at: https://doi.org/10.3390/cmtr19010017.
Segeroth, M. et al. (2026) ‘AI-Based Myocardial Segmentation and Attenuation Mapping Improved Detection of Myocardial Ischemia and Infarction on Emergency CT Angiography’, Bioengineering, 13(3), p. 355. Available at: https://doi.org/10.3390/bioengineering13030355.
Segeroth, M. et al. (2026) ‘AI-Based Myocardial Segmentation and Attenuation Mapping Improved Detection of Myocardial Ischemia and Infarction on Emergency CT Angiography’, Bioengineering, 13(3), p. 355. Available at: https://doi.org/10.3390/bioengineering13030355.
Oteiza, J.Z. et al. (2026) ‘Surgical Performance of 3D-Printed Polyetheretherketone (PEEK) Patient-Specific Implants and Titanium Mesh in Clinically Matched Orbital Reconstruction: A Cadaveric Study’, Craniomaxillofacial Trauma & Reconstruction, 19(1), p. 13. Available at: https://doi.org/10.3390/cmtr19010013.
Oteiza, J.Z. et al. (2026) ‘Surgical Performance of 3D-Printed Polyetheretherketone (PEEK) Patient-Specific Implants and Titanium Mesh in Clinically Matched Orbital Reconstruction: A Cadaveric Study’, Craniomaxillofacial Trauma & Reconstruction, 19(1), p. 13. Available at: https://doi.org/10.3390/cmtr19010013.
Kallenbach, Bita et al. (2026) ‘3D-Planned, Patient-Specific Distal Radius Reconstruction with a Vascularized Double-Barrel Free Fibular Graft After Secondary Aneurysmal Bone Cyst’, Journal of Clinical Medicine, 15. Available at: https://doi.org/10.3390/jcm15051857.
Kallenbach, Bita et al. (2026) ‘3D-Planned, Patient-Specific Distal Radius Reconstruction with a Vascularized Double-Barrel Free Fibular Graft After Secondary Aneurysmal Bone Cyst’, Journal of Clinical Medicine, 15. Available at: https://doi.org/10.3390/jcm15051857.
Xie, Kunpeng et al. (2026) ‘Beyond benchmarks: Towards robust artificial intelligence bone segmentation in socio-technical systems’, Expert Systems with Applications, 299. Available at: https://doi.org/10.1016/j.eswa.2025.130031.
Xie, Kunpeng et al. (2026) ‘Beyond benchmarks: Towards robust artificial intelligence bone segmentation in socio-technical systems’, Expert Systems with Applications, 299. Available at: https://doi.org/10.1016/j.eswa.2025.130031.
Cunha, G. et al. (2026) ‘Do cortical and medullary bone volume, and retromolar and ramus thickness, influence the sagittal split pattern? A retrospective analysis’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2026.01.006.
Cunha, G. et al. (2026) ‘Do cortical and medullary bone volume, and retromolar and ramus thickness, influence the sagittal split pattern? A retrospective analysis’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2026.01.006.
D’Amado, M.P. et al. (2026) ‘Comparison of the Ultrasonic Tip with Multidirectional Angular Cutting Geometry with the Straight Dentition Cutting in Bone Osteotomies with the Piezoelectric Technique’, Dentistry Journal, 14(2), p. 91. Available at: https://doi.org/10.3390/dj14020091.
D’Amado, M.P. et al. (2026) ‘Comparison of the Ultrasonic Tip with Multidirectional Angular Cutting Geometry with the Straight Dentition Cutting in Bone Osteotomies with the Piezoelectric Technique’, Dentistry Journal, 14(2), p. 91. Available at: https://doi.org/10.3390/dj14020091.
Beyer, M. et al. (2026) ‘A Slicer-Independent Framework for Measuring G-Code Accuracy in Medical 3D Printing’, Journal of Imaging, 12(1), p. 25. Available at: https://doi.org/10.3390/jimaging12010025.
Beyer, M. et al. (2026) ‘A Slicer-Independent Framework for Measuring G-Code Accuracy in Medical 3D Printing’, Journal of Imaging, 12(1), p. 25. Available at: https://doi.org/10.3390/jimaging12010025.
Roehling, S. et al. (2026) ‘Long-Term Clinical, Radiographic and Esthetic Outcomes of Zirconia Dental Implants: A 10-Year Prospective Multicenter Study’, Clinical Oral Implants Research [Preprint]. Available at: https://doi.org/10.1111/clr.70089.
Roehling, S. et al. (2026) ‘Long-Term Clinical, Radiographic and Esthetic Outcomes of Zirconia Dental Implants: A 10-Year Prospective Multicenter Study’, Clinical Oral Implants Research [Preprint]. Available at: https://doi.org/10.1111/clr.70089.
Scheiwiler, A.N. et al. (2026) ‘A Clinical Decision-Making Algorithm for Botulinum Toxin Use in Temporomandibular Disorders and Bruxism’, Journal of Clinical Medicine, 15(2), p. 755. Available at: https://doi.org/10.3390/jcm15020755.
Scheiwiler, A.N. et al. (2026) ‘A Clinical Decision-Making Algorithm for Botulinum Toxin Use in Temporomandibular Disorders and Bruxism’, Journal of Clinical Medicine, 15(2), p. 755. Available at: https://doi.org/10.3390/jcm15020755.
Donati, Jérôme et al. (2025) ‘Artificial intelligence in dentistry: insights and expectations from Swiss dental professionals’, BMC Medical Informatics and Decision Making, 25(1). Available at: https://doi.org/10.1186/s12911-025-03066-9.
Donati, Jérôme et al. (2025) ‘Artificial intelligence in dentistry: insights and expectations from Swiss dental professionals’, BMC Medical Informatics and Decision Making, 25(1). Available at: https://doi.org/10.1186/s12911-025-03066-9.
Haefeli, Mathias et al. (2025) ‘Patient-specific lunate prosthesis with perilunate ligament reconstruction: surgical technique’, Archives of Orthopaedic and Trauma Surgery, 145. Available at: https://doi.org/10.1007/s00402-025-06123-0.
Haefeli, Mathias et al. (2025) ‘Patient-specific lunate prosthesis with perilunate ligament reconstruction: surgical technique’, Archives of Orthopaedic and Trauma Surgery, 145. Available at: https://doi.org/10.1007/s00402-025-06123-0.
Honigmann, Philipp et al. (2025) ‘Patient-specific scaphoid prosthesis: surgical technique’, Archives of Orthopaedic and Trauma Surgery, 145(1). Available at: https://doi.org/10.1007/s00402-024-05609-7.
Honigmann, Philipp et al. (2025) ‘Patient-specific scaphoid prosthesis: surgical technique’, Archives of Orthopaedic and Trauma Surgery, 145(1). Available at: https://doi.org/10.1007/s00402-024-05609-7.
Maintz, Michaela et al. (2025) ‘Influence of pacifier design on pacifier-palate contact: a finite element analysis’, Head and Face Medicine, 21. Available at: https://doi.org/10.1186/s13005-025-00525-6.
Maintz, Michaela et al. (2025) ‘Influence of pacifier design on pacifier-palate contact: a finite element analysis’, Head and Face Medicine, 21. Available at: https://doi.org/10.1186/s13005-025-00525-6.
Martín-Rodríguez, Rubén et al. (2025) ‘A robotic platform for navigated intraoperative 3D printing of patient-specific implants’, At-Automatisierungstechnik, 73, pp. 951–965. Available at: https://doi.org/10.1515/auto-2025-0093.
Martín-Rodríguez, Rubén et al. (2025) ‘A robotic platform for navigated intraoperative 3D printing of patient-specific implants’, At-Automatisierungstechnik, 73, pp. 951–965. Available at: https://doi.org/10.1515/auto-2025-0093.
Seifert, Lukas Benedikt et al. (2025) ‘A novel 3D-printed simulator for hands-on training in orthognathic surgery’, Maxillofacial Plastic and Reconstructive Surgery, 47. Available at: https://doi.org/10.1186/s40902-025-00462-z.
Seifert, Lukas Benedikt et al. (2025) ‘A novel 3D-printed simulator for hands-on training in orthognathic surgery’, Maxillofacial Plastic and Reconstructive Surgery, 47. Available at: https://doi.org/10.1186/s40902-025-00462-z.
von Haller, Marianne, Couchman, Louise and Honigmann, Philipp (2025) ‘Economic evaluation of the manufacturing of 3D-printed wrist orthoses vs low temperature thermoplastic wrist orthoses’, 3D Printing in Medicine, 11. Available at: https://doi.org/10.1186/s41205-025-00287-6.
von Haller, Marianne, Couchman, Louise and Honigmann, Philipp (2025) ‘Economic evaluation of the manufacturing of 3D-printed wrist orthoses vs low temperature thermoplastic wrist orthoses’, 3D Printing in Medicine, 11. Available at: https://doi.org/10.1186/s41205-025-00287-6.
Fan, K., Leung, Y.Y. and Thieringer, F.M. (2025) ‘CMTR—Aims and Scope Update’, Craniomaxillofacial Trauma & Reconstruction, 18(4), p. 49. Available at: https://doi.org/10.3390/cmtr18040049.
Fan, K., Leung, Y.Y. and Thieringer, F.M. (2025) ‘CMTR—Aims and Scope Update’, Craniomaxillofacial Trauma & Reconstruction, 18(4), p. 49. Available at: https://doi.org/10.3390/cmtr18040049.
Honigmann, P. et al. (2025) ‘From the Freezer to Implant: Does Cadaver Freezing Affect the Accuracy of 3D-Printed Scaphoid Prosthesis Models?’, 12. Available at: https://doi.org/10.3390/bioengineering12111183.
Honigmann, P. et al. (2025) ‘From the Freezer to Implant: Does Cadaver Freezing Affect the Accuracy of 3D-Printed Scaphoid Prosthesis Models?’, 12. Available at: https://doi.org/10.3390/bioengineering12111183.
Beyer, M. et al. (2025) ‘Comparative Evaluation of SLA and DLP 3D Printing in Dental Implant Guides: Impact on Fabrication Accuracy, Speed, and Resin Usage’, 13. Available at: https://doi.org/10.3390/dj13100471.
Beyer, M. et al. (2025) ‘Comparative Evaluation of SLA and DLP 3D Printing in Dental Implant Guides: Impact on Fabrication Accuracy, Speed, and Resin Usage’, 13. Available at: https://doi.org/10.3390/dj13100471.
Basoli, V. et al. (2025) ‘Engineering Poly(L-Lactic Acid)/Hydroxyapatite Scaffolds via Melt-Electrowriting: Enhancement of Osteochondral Cell Response in Human Nasal Chondrocytes’, 17. Available at: https://doi.org/10.3390/polym17182455.
Basoli, V. et al. (2025) ‘Engineering Poly(L-Lactic Acid)/Hydroxyapatite Scaffolds via Melt-Electrowriting: Enhancement of Osteochondral Cell Response in Human Nasal Chondrocytes’, 17. Available at: https://doi.org/10.3390/polym17182455.
Beyer, Michel et al. (2025) ‘Innovations in gender affirmation: AI-enhanced surgical guides for mandibular facial feminization surgery’, Clinical Oral Investigations, 29. Available at: https://doi.org/10.1007/s00784-025-06459-2.
Beyer, Michel et al. (2025) ‘Innovations in gender affirmation: AI-enhanced surgical guides for mandibular facial feminization surgery’, Clinical Oral Investigations, 29. Available at: https://doi.org/10.1007/s00784-025-06459-2.
Jorba-Garcia, Adrià et al. (2025) ‘Glossary of Computer-Assisted Implant Surgery and Related Terms. First Edition’, Clinical and Experimental Dental Research, 11. Available at: https://doi.org/10.1002/cre2.70148.
Jorba-Garcia, Adrià et al. (2025) ‘Glossary of Computer-Assisted Implant Surgery and Related Terms. First Edition’, Clinical and Experimental Dental Research, 11. Available at: https://doi.org/10.1002/cre2.70148.
Sharma, Neha and Thieringer, Florian M. (2025) ‘Advancements in Personalized Digital Oral and Craniomaxillofacial Surgery’, Oral and Maxillofacial Surgery Clinics of North America, 37, pp. xi–xii. Available at: https://doi.org/10.1016/j.coms.2025.05.001.
Sharma, Neha and Thieringer, Florian M. (2025) ‘Advancements in Personalized Digital Oral and Craniomaxillofacial Surgery’, Oral and Maxillofacial Surgery Clinics of North America, 37, pp. xi–xii. Available at: https://doi.org/10.1016/j.coms.2025.05.001.
Westarp, Emilia et al. (2025) ‘Spheno-Orbital Meningiomas: Advances in Reconstruction Workflow and Cosmetic/Functional Outcomes in the Digital Era’, Oral and Maxillofacial Surgery Clinics of North America, 37, pp. 517–527. Available at: https://doi.org/10.1016/j.coms.2025.04.006.
Westarp, Emilia et al. (2025) ‘Spheno-Orbital Meningiomas: Advances in Reconstruction Workflow and Cosmetic/Functional Outcomes in the Digital Era’, Oral and Maxillofacial Surgery Clinics of North America, 37, pp. 517–527. Available at: https://doi.org/10.1016/j.coms.2025.04.006.
Wolvius, Eppo B et al. (2025) ‘Surgical versus non-surgical management of orbital fractures: study protocol for evidence generation of a prospective multicentre observational cohort registry’, BMJ Open, 15. Available at: https://doi.org/10.1136/bmjopen-2025-100508.
Wolvius, Eppo B et al. (2025) ‘Surgical versus non-surgical management of orbital fractures: study protocol for evidence generation of a prospective multicentre observational cohort registry’, BMJ Open, 15. Available at: https://doi.org/10.1136/bmjopen-2025-100508.
Strong, E. Brandon et al. (2025) ‘Augmented Reality Navigation in Craniomaxillofacial/Head and Neck Surgery’, Oto Open, 9. Available at: https://doi.org/10.1002/oto2.70108.
Strong, E. Brandon et al. (2025) ‘Augmented Reality Navigation in Craniomaxillofacial/Head and Neck Surgery’, Oto Open, 9. Available at: https://doi.org/10.1002/oto2.70108.
Meier, R. et al. (2025) ‘Schmerzen am ersten Strahl der Hand: Differenzialdiagnosen und Therapien’, Die Orthopädie [Preprint]. Available at: https://doi.org/10.1007/s00132-025-04616-9.
Meier, R. et al. (2025) ‘Schmerzen am ersten Strahl der Hand: Differenzialdiagnosen und Therapien’, Die Orthopädie [Preprint]. Available at: https://doi.org/10.1007/s00132-025-04616-9.
Yoshikawa, O. et al. (2025) ‘Electrospun Polycaprolactone-Curcumin Scaffolds: Optimization of fiber production for enhanced Nanotopography and improved biological cell adhesion’, European Polymer Journal, 222. Available at: https://doi.org/10.1016/j.eurpolymj.2024.113616.
Yoshikawa, O. et al. (2025) ‘Electrospun Polycaprolactone-Curcumin Scaffolds: Optimization of fiber production for enhanced Nanotopography and improved biological cell adhesion’, European Polymer Journal, 222. Available at: https://doi.org/10.1016/j.eurpolymj.2024.113616.
Leung, Y.Y., Fan, K. and Thieringer, F.M. (2025) ‘Craniomaxillofacial Trauma and Reconstruction: A New Era in Open Access Publishing’, Craniomaxillofacial Trauma & Reconstruction, 18(1), p. 1. Available at: https://doi.org/10.3390/cmtr18010001.
Leung, Y.Y., Fan, K. and Thieringer, F.M. (2025) ‘Craniomaxillofacial Trauma and Reconstruction: A New Era in Open Access Publishing’, Craniomaxillofacial Trauma & Reconstruction, 18(1), p. 1. Available at: https://doi.org/10.3390/cmtr18010001.
Beyer, M. et al. (2025) ‘An innovative AI-based dual segmentation application for head surgery’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2025.11.005.
Beyer, M. et al. (2025) ‘An innovative AI-based dual segmentation application for head surgery’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2025.11.005.
Ha, Thanh T. et al. (2025) ‘Feasibility of Robot-Guided Laser Osteotomy for Anterior Clinoidectomy and Optic Canal Delineation in a Preclinical Cadaveric Study: Current Evidence and Future Perspectives’, Operative Neurosurgery [Preprint]. 26.12.2025. Available at: https://doi.org/10.1227/ons.0000000000001887.
Ha, Thanh T. et al. (2025) ‘Feasibility of Robot-Guided Laser Osteotomy for Anterior Clinoidectomy and Optic Canal Delineation in a Preclinical Cadaveric Study: Current Evidence and Future Perspectives’, Operative Neurosurgery [Preprint]. 26.12.2025. Available at: https://doi.org/10.1227/ons.0000000000001887.
Kan, Hester J, Honigmann, Philipp and Degreef, Ilse (2025) ‘Conflicts of interest in hand surgery: recognizing risks, navigating challenges and promoting integrity’, Journal of Hand Surgery European Volume [Preprint]. Available at: https://doi.org/10.1177/17531934251403333.
Kan, Hester J, Honigmann, Philipp and Degreef, Ilse (2025) ‘Conflicts of interest in hand surgery: recognizing risks, navigating challenges and promoting integrity’, Journal of Hand Surgery European Volume [Preprint]. Available at: https://doi.org/10.1177/17531934251403333.
Meier, Maria et al. (2025) ‘Technologie-Duell im Dental-3-D-Druck’, 2(51).
Meier, Maria et al. (2025) ‘Technologie-Duell im Dental-3-D-Druck’, 2(51).
Michaela Valerie Maintz (2025) Simulation-driven methods for the next generation of patient-specific osteosynthesis plates. Doctoral Thesis. University of Basel.
Michaela Valerie Maintz (2025) Simulation-driven methods for the next generation of patient-specific osteosynthesis plates. Doctoral Thesis. University of Basel.
Msallem, Bilal et al. (2025) ‘Evaluation of angulation and distance deviation for robot-guided laser osteotomy – a follow-up study on digital high-tech procedures’, Frontiers in Robotics and AI, 12. Available at: https://doi.org/10.3389/frobt.2025.1559483.
Msallem, Bilal et al. (2025) ‘Evaluation of angulation and distance deviation for robot-guided laser osteotomy – a follow-up study on digital high-tech procedures’, Frontiers in Robotics and AI, 12. Available at: https://doi.org/10.3389/frobt.2025.1559483.
Rashad, A. et al. (2025) ‘Pioneering fully automated bony orbit segmentation: an in silico nnU-Net multicentre approach’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2025.11.002.
Rashad, A. et al. (2025) ‘Pioneering fully automated bony orbit segmentation: an in silico nnU-Net multicentre approach’, International Journal of Oral and Maxillofacial Surgery [Preprint]. Available at: https://doi.org/10.1016/j.ijom.2025.11.002.
Sharma, Neha et al. (2025) ‘Personalized Cranial Implants: Pioneering Techniques with Additive Manufacturing’, in Atlas of Virtual Surgical Planning and 3D Printing for Cranio Maxillo Facial Surgery. (Atlas of Virtual Surgical Planning and 3D Printing for Cranio-Maxillo-Facial Surgery), pp. 161–169. Available at: https://doi.org/10.1007/978-3-031-94495-6_11.
Sharma, Neha et al. (2025) ‘Personalized Cranial Implants: Pioneering Techniques with Additive Manufacturing’, in Atlas of Virtual Surgical Planning and 3D Printing for Cranio Maxillo Facial Surgery. (Atlas of Virtual Surgical Planning and 3D Printing for Cranio-Maxillo-Facial Surgery), pp. 161–169. Available at: https://doi.org/10.1007/978-3-031-94495-6_11.
Sommacal, Adelita et al. (2025) ‘Development of Palatal Growth Charts for Unilateral Cleft Lip and Palate Before Primary Single-Stage Repair’, Cleft Palate Craniofacial Journal [Preprint]. Available at: https://doi.org/10.1177/10556656251369672.
Sommacal, Adelita et al. (2025) ‘Development of Palatal Growth Charts for Unilateral Cleft Lip and Palate Before Primary Single-Stage Repair’, Cleft Palate Craniofacial Journal [Preprint]. Available at: https://doi.org/10.1177/10556656251369672.
Tourbier, C. et al. (2025) ‘Comprehensive interdisciplinary treatment of an orbital lymphatic-venous malformation: A case report’, Innovative Surgical Sciences [Preprint]. Available at: https://doi.org/10.1515/iss-2025-0010.
Tourbier, C. et al. (2025) ‘Comprehensive interdisciplinary treatment of an orbital lymphatic-venous malformation: A case report’, Innovative Surgical Sciences [Preprint]. Available at: https://doi.org/10.1515/iss-2025-0010.
Weber, Andreas et al. (2025) ‘Hand’, in Orthopedics Must Knows. (Orthopedics Must Knows), pp. 95–138. Available at: https://doi.org/10.1007/978-3-662-70893-4_5.
Weber, Andreas et al. (2025) ‘Hand’, in Orthopedics Must Knows. (Orthopedics Must Knows), pp. 95–138. Available at: https://doi.org/10.1007/978-3-662-70893-4_5.
Żelechowski, M. et al. (2025) ‘Augmented reality navigation in orthognathic surgery: Comparative analysis and a paradigm shift’, Healthcare Technology Letters, 12(1). Available at: https://doi.org/10.1049/htl2.12109.
Żelechowski, M. et al. (2025) ‘Augmented reality navigation in orthognathic surgery: Comparative analysis and a paradigm shift’, Healthcare Technology Letters, 12(1). Available at: https://doi.org/10.1049/htl2.12109.
de Macêdo Santos, José Wittor et al. (2024) ‘Intraosseous myofibroma mimicking an odontogenic lesion: case report, literature review, and differential diagnosis’, World Journal of Surgical Oncology, 22(1). Available at: https://doi.org/10.1186/s12957-024-03520-4.
de Macêdo Santos, José Wittor et al. (2024) ‘Intraosseous myofibroma mimicking an odontogenic lesion: case report, literature review, and differential diagnosis’, World Journal of Surgical Oncology, 22(1). Available at: https://doi.org/10.1186/s12957-024-03520-4.
Jakimiuk, Adam et al. (2024) ‘3D-printed patient-specific implants made of polylactide (PLDLLA) and β-tricalcium phosphate (β-TCP) for corrective osteotomies of the distal radius’, 3D Printing in Medicine. 18.12.2024, 10(1). Available at: https://doi.org/10.1186/s41205-024-00240-z.
Jakimiuk, Adam et al. (2024) ‘3D-printed patient-specific implants made of polylactide (PLDLLA) and β-tricalcium phosphate (β-TCP) for corrective osteotomies of the distal radius’, 3D Printing in Medicine. 18.12.2024, 10(1). Available at: https://doi.org/10.1186/s41205-024-00240-z.
Keller, Marco, Rohner, Meret and Honigmann, Philipp (2024) ‘The potential benefit of artificial intelligence regarding clinical decision-making in the treatment of wrist trauma patients’, Journal of Orthopaedic Surgery and Research, 19(1). Available at: https://doi.org/10.1186/s13018-024-05063-6.
Keller, Marco, Rohner, Meret and Honigmann, Philipp (2024) ‘The potential benefit of artificial intelligence regarding clinical decision-making in the treatment of wrist trauma patients’, Journal of Orthopaedic Surgery and Research, 19(1). Available at: https://doi.org/10.1186/s13018-024-05063-6.
von Haller, Marianne, Couchman, Louise and Honigmann, Philipp (2024) ‘Production time and practicability of 3D-Printed wrist orthoses versus low temperature thermoplastic wrist orthoses’, Hand Therapy, 29(4), pp. 188–194. Available at: https://doi.org/10.1177/17589983241287069.
von Haller, Marianne, Couchman, Louise and Honigmann, Philipp (2024) ‘Production time and practicability of 3D-Printed wrist orthoses versus low temperature thermoplastic wrist orthoses’, Hand Therapy, 29(4), pp. 188–194. Available at: https://doi.org/10.1177/17589983241287069.
Harbrecht, A. et al. (2024) ‘Morbus Dupuytren’, Die Orthopädie, 53(11), pp. 893–902. Available at: https://doi.org/10.1007/s00132-024-04553-z.
Harbrecht, A. et al. (2024) ‘Morbus Dupuytren’, Die Orthopädie, 53(11), pp. 893–902. Available at: https://doi.org/10.1007/s00132-024-04553-z.
Wang, Kenneth C. et al. (2024) ‘Demographics, Utilization, Workflow, and Outcomes Based on Observational Data From the RSNA-ACR 3D Printing Registry’, Journal of the American College of Radiology, 21(11), pp. 1781–1791. Available at: https://doi.org/10.1016/j.jacr.2024.07.019.
Wang, Kenneth C. et al. (2024) ‘Demographics, Utilization, Workflow, and Outcomes Based on Observational Data From the RSNA-ACR 3D Printing Registry’, Journal of the American College of Radiology, 21(11), pp. 1781–1791. Available at: https://doi.org/10.1016/j.jacr.2024.07.019.
Keller, Marco et al. (2024) ‘Three-Dimensional Analysis of the First Metacarpal Axes in Healthy Individuals and Early-Stage Thumb Carpometacarpal Osteoarthritis Patients—Potential Implication on First Metacarpal Corrective Osteotomy’, Journal of Clinical Medicine, 13(18). Available at: https://doi.org/10.3390/jcm13185513.
Keller, Marco et al. (2024) ‘Three-Dimensional Analysis of the First Metacarpal Axes in Healthy Individuals and Early-Stage Thumb Carpometacarpal Osteoarthritis Patients—Potential Implication on First Metacarpal Corrective Osteotomy’, Journal of Clinical Medicine, 13(18). Available at: https://doi.org/10.3390/jcm13185513.
Eglin, Micha et al. (2024) ‘Impact of social support and religiosity/spirituality on recovery from acute cardiac events and heart surgery in Switzerland’, The International Journal of Psychiatry in Medicine. 29.12.2023, 59(5), pp. 595–609. Available at: https://doi.org/10.1177/00912174231225801.
Eglin, Micha et al. (2024) ‘Impact of social support and religiosity/spirituality on recovery from acute cardiac events and heart surgery in Switzerland’, The International Journal of Psychiatry in Medicine. 29.12.2023, 59(5), pp. 595–609. Available at: https://doi.org/10.1177/00912174231225801.
Segeroth, Martin et al. (2024) ‘Cardiac Cine MRI Using a Commercially Available 0.55-T Scanner’, Radiology: Cardiothoracic Imaging. 11.07.2024, 6(4). Available at: https://doi.org/10.1148/ryct.230331.
Segeroth, Martin et al. (2024) ‘Cardiac Cine MRI Using a Commercially Available 0.55-T Scanner’, Radiology: Cardiothoracic Imaging. 11.07.2024, 6(4). Available at: https://doi.org/10.1148/ryct.230331.
Guerra RC et al. (2024) ‘Finite element analysis of low-profile reconstruction plates for atrophic mandibles: a comparison of novel 3D grid and conventional plate designs’, Oral and Maxillofacial Surgery, 28(2), pp. 595–603. Available at: https://doi.org/10.1007/s10006-023-01173-3.
Guerra RC et al. (2024) ‘Finite element analysis of low-profile reconstruction plates for atrophic mandibles: a comparison of novel 3D grid and conventional plate designs’, Oral and Maxillofacial Surgery, 28(2), pp. 595–603. Available at: https://doi.org/10.1007/s10006-023-01173-3.
Xingting Han et al. (2024) ‘A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating’, Dental Materials, 40(4), pp. 674–688. Available at: https://doi.org/10.1016/j.dental.2024.02.011.
Xingting Han et al. (2024) ‘A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating’, Dental Materials, 40(4), pp. 674–688. Available at: https://doi.org/10.1016/j.dental.2024.02.011.
Honigmann, P. et al. (2024) ‘Comparative CT-Based Assessment of Segmentation Accuracy and Volumetric Variability in Scaphoids from Frozen and Thawed Cadaver Arms for Scaphoid Prosthesis Modeling’. Research Square Platform LLC. Available at: https://doi.org/10.21203/rs.3.rs-4049296/v1.
Honigmann, P. et al. (2024) ‘Comparative CT-Based Assessment of Segmentation Accuracy and Volumetric Variability in Scaphoids from Frozen and Thawed Cadaver Arms for Scaphoid Prosthesis Modeling’. Research Square Platform LLC. Available at: https://doi.org/10.21203/rs.3.rs-4049296/v1.
Guebeli A et al. (2024) ‘In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial’, Journal of Hand Surgery: European Volume, 49(3), pp. 350–358. Available at: https://doi.org/10.1177/17531934231187554.
Guebeli A et al. (2024) ‘In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial’, Journal of Hand Surgery: European Volume, 49(3), pp. 350–358. Available at: https://doi.org/10.1177/17531934231187554.
Miazza, Jules et al. (2024) ‘Aortic root rotation: morphological analysis of the aortic root with three-dimensional computed tomography’, European Journal of Cardio-thoracic Surgery , 65(3). Available at: https://doi.org/10.1093/ejcts/ezae040.
Miazza, Jules et al. (2024) ‘Aortic root rotation: morphological analysis of the aortic root with three-dimensional computed tomography’, European Journal of Cardio-thoracic Surgery , 65(3). Available at: https://doi.org/10.1093/ejcts/ezae040.
Wetterauer, Christian et al. (2024) ‘Opportunistic Prostate Cancer Screening with Biparametric Magnetic Resonance Imaging (VISIONING)’, European Urology Focus. 16.07.2024, 10(2), pp. 332–338. Available at: https://doi.org/10.1016/j.euf.2024.02.006.
Wetterauer, Christian et al. (2024) ‘Opportunistic Prostate Cancer Screening with Biparametric Magnetic Resonance Imaging (VISIONING)’, European Urology Focus. 16.07.2024, 10(2), pp. 332–338. Available at: https://doi.org/10.1016/j.euf.2024.02.006.
Meyer S et al. (2024) ‘Three-Dimensional Printable Open-Source Cleft Lip and Palate Impression Trays: A Single-Impression Workflow’, Plastic and Reconstructive Surgery, 153(2), pp. 462–465. Available at: https://doi.org/10.1097/prs.0000000000010684.
Meyer S et al. (2024) ‘Three-Dimensional Printable Open-Source Cleft Lip and Palate Impression Trays: A Single-Impression Workflow’, Plastic and Reconstructive Surgery, 153(2), pp. 462–465. Available at: https://doi.org/10.1097/prs.0000000000010684.
Honigmann, Philipp et al. (2024) ‘Patient-Specific Treatment in Hand Surgery: Smart Innovations and Rapid Translation into the Point of Care’, in Management for Professionals. Springer Nature (Management for Professionals), pp. 97–121. Available at: https://doi.org/10.1007/978-3-031-47768-3_7.
Honigmann, Philipp et al. (2024) ‘Patient-Specific Treatment in Hand Surgery: Smart Innovations and Rapid Translation into the Point of Care’, in Management for Professionals. Springer Nature (Management for Professionals), pp. 97–121. Available at: https://doi.org/10.1007/978-3-031-47768-3_7.
Keller, Marco, Thieringer, Florian M. and Honigmann, Philipp (2024) ‘Artificial Intelligence in Musculoskeletal Medical Imaging’, in Management for Professionals. Springer Nature (Management for Professionals), pp. 149–168. Available at: https://doi.org/10.1007/978-3-031-47768-3_9.
Keller, Marco, Thieringer, Florian M. and Honigmann, Philipp (2024) ‘Artificial Intelligence in Musculoskeletal Medical Imaging’, in Management for Professionals. Springer Nature (Management for Professionals), pp. 149–168. Available at: https://doi.org/10.1007/978-3-031-47768-3_9.
Marco Keller, Florian M. Thieringer and Philipp Honigmann (2024) ‘Artificial Intelligence in Musculoskeletal Medical Imaging’, in Innovations in Life Sciences – The Digital Revolution. Springer Nature Switzerland, 2024 (Innovations in Life Sciences – The Digital Revolution), pp. 149–168.
Marco Keller, Florian M. Thieringer and Philipp Honigmann (2024) ‘Artificial Intelligence in Musculoskeletal Medical Imaging’, in Innovations in Life Sciences – The Digital Revolution. Springer Nature Switzerland, 2024 (Innovations in Life Sciences – The Digital Revolution), pp. 149–168.
Philipp Honigmann et al. (2024) ‘Patient Specific Treatment in Hand Surgery – Smart Innovations and Rapid Translation into the Point of Care’, in Innovations in Life Sciences – The Digital Revolution. (Innovations in Life Sciences – The Digital Revolution), pp. 97–121.
Philipp Honigmann et al. (2024) ‘Patient Specific Treatment in Hand Surgery – Smart Innovations and Rapid Translation into the Point of Care’, in Innovations in Life Sciences – The Digital Revolution. (Innovations in Life Sciences – The Digital Revolution), pp. 97–121.
Saemann, Attill et al. (2024) ‘Innovating neurosurgical training: a comprehensive evaluation of a 3D-printed intraventricular neuroendoscopy simulator and systematic review of the literature’, Frontiers in Surgery, 11. Available at: https://doi.org/10.3389/fsurg.2024.1446067.
Saemann, Attill et al. (2024) ‘Innovating neurosurgical training: a comprehensive evaluation of a 3D-printed intraventricular neuroendoscopy simulator and systematic review of the literature’, Frontiers in Surgery, 11. Available at: https://doi.org/10.3389/fsurg.2024.1446067.
Saemann, A. et al. (2024) ‘3D-Printed Intraventricular Neuroendoscopy Simulator: Development, Validation, and future Training Applications’, Brain and Spine, 4, p. 103454. Available at: https://doi.org/10.1016/j.bas.2024.103454.
Saemann, A. et al. (2024) ‘3D-Printed Intraventricular Neuroendoscopy Simulator: Development, Validation, and future Training Applications’, Brain and Spine, 4, p. 103454. Available at: https://doi.org/10.1016/j.bas.2024.103454.
Segeroth, Martin et al. (2024) ‘Noninvasive Assessment of Cardiopulmonary Hemodynamics Using Cardiovascular Magnetic Resonance Pulmonary Transit Time’, International Journal of Biomedical Imaging, 2024(1). Available at: https://doi.org/10.1155/2024/5691909.
Segeroth, Martin et al. (2024) ‘Noninvasive Assessment of Cardiopulmonary Hemodynamics Using Cardiovascular Magnetic Resonance Pulmonary Transit Time’, International Journal of Biomedical Imaging, 2024(1). Available at: https://doi.org/10.1155/2024/5691909.
Hu L et al. (2023) ‘Automated deep-learning system in the assessment of MRI-visible prostate cancer: comparison of advanced zoomed diffusion-weighted imaging and conventional technique’, Cancer Imaging, 23(1), p. 6. Available at: https://doi.org/10.1186/s40644-023-00527-0.
Hu L et al. (2023) ‘Automated deep-learning system in the assessment of MRI-visible prostate cancer: comparison of advanced zoomed diffusion-weighted imaging and conventional technique’, Cancer Imaging, 23(1), p. 6. Available at: https://doi.org/10.1186/s40644-023-00527-0.
Zeller, Alexander-N. et al. (2023) ‘A survey regarding the organizational aspects and quality systems of in-house 3D printing in oral and maxillofacial surgery in Germany’, Oral and Maxillofacial Surgery, 27, pp. 661–673. Available at: https://doi.org/10.1007/s10006-022-01109-3.
Zeller, Alexander-N. et al. (2023) ‘A survey regarding the organizational aspects and quality systems of in-house 3D printing in oral and maxillofacial surgery in Germany’, Oral and Maxillofacial Surgery, 27, pp. 661–673. Available at: https://doi.org/10.1007/s10006-022-01109-3.
Li, Na et al. (2023) ‘Building a better bone: The synergy of 2D nanomaterials and 3D printing for bone tissue engineering’, Materials and Design, 234. Available at: https://doi.org/10.1016/j.matdes.2023.112362.
Li, Na et al. (2023) ‘Building a better bone: The synergy of 2D nanomaterials and 3D printing for bone tissue engineering’, Materials and Design, 234. Available at: https://doi.org/10.1016/j.matdes.2023.112362.
Honigmann P et al. (2023) ‘Extension osteotomy of the metacarpal I and ligamentoplasty of the trapeziometacarpal joint for the treatment of early-stage osteoarthritis and instability of the trapeziometacarpal joint’, Archives of Orthopaedic and Trauma Surgery, 143(9), pp. 6011–6018. Available at: https://doi.org/10.1007/s00402-023-04883-1.
Honigmann P et al. (2023) ‘Extension osteotomy of the metacarpal I and ligamentoplasty of the trapeziometacarpal joint for the treatment of early-stage osteoarthritis and instability of the trapeziometacarpal joint’, Archives of Orthopaedic and Trauma Surgery, 143(9), pp. 6011–6018. Available at: https://doi.org/10.1007/s00402-023-04883-1.
Honigmann P et al. (2023) ‘Correction to: Extension osteotomy of the metacarpal I and ligamentoplasty of the trapeziometacarpal joint for the treatment of early‑stage osteoarthritis and instability of the trapeziometacarpal joint (Archives of Orthopaedic and Trauma Surgery, (2023), 143, 9, (6011-6018), 10.1007/s00402-023-04883-1)’, Archives of Orthopaedic and Trauma Surgery. Springer Science and Business Media Deutschland GmbH, 143(9). Available at: https://doi.org/10.1007/s00402-023-04942-7.
Honigmann P et al. (2023) ‘Correction to: Extension osteotomy of the metacarpal I and ligamentoplasty of the trapeziometacarpal joint for the treatment of early‑stage osteoarthritis and instability of the trapeziometacarpal joint (Archives of Orthopaedic and Trauma Surgery, (2023), 143, 9, (6011-6018), 10.1007/s00402-023-04883-1)’, Archives of Orthopaedic and Trauma Surgery. Springer Science and Business Media Deutschland GmbH, 143(9). Available at: https://doi.org/10.1007/s00402-023-04942-7.
Keller M. et al. (2023) ‘Artificial intelligence in patient-specific hand surgery: a scoping review of literature’, International Journal of Computer Assisted Radiology and Surgery, 18(8), pp. 1393–1403. Available at: https://doi.org/10.1007/s11548-023-02831-3.
Keller M. et al. (2023) ‘Artificial intelligence in patient-specific hand surgery: a scoping review of literature’, International Journal of Computer Assisted Radiology and Surgery, 18(8), pp. 1393–1403. Available at: https://doi.org/10.1007/s11548-023-02831-3.
Maintz, Michaela et al. (2023) ‘Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach’, Journal of the Mechanical Behavior of Biomedical Materials, 144. Available at: https://doi.org/10.1016/j.jmbbm.2023.105948.
Maintz, Michaela et al. (2023) ‘Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach’, Journal of the Mechanical Behavior of Biomedical Materials, 144. Available at: https://doi.org/10.1016/j.jmbbm.2023.105948.
Michaela Maintz et al. (2023) ‘Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach’, Journal of the Mechanical Behavior of Biomedical Materials, 144. Available at: https://doi.org/10.1016/j.jmbbm.2023.105948.
Michaela Maintz et al. (2023) ‘Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach’, Journal of the Mechanical Behavior of Biomedical Materials, 144. Available at: https://doi.org/10.1016/j.jmbbm.2023.105948.
Segeroth, Martin et al. (2023) ‘Pulmonary transit time of cardiovascular magnetic resonance perfusion scans for quantification of cardiopulmonary haemodynamics’, European Heart Journal Cardiovascular Imaging, 24(8), pp. 1062–1071. Available at: https://doi.org/10.1093/ehjci/jead001.
Segeroth, Martin et al. (2023) ‘Pulmonary transit time of cardiovascular magnetic resonance perfusion scans for quantification of cardiopulmonary haemodynamics’, European Heart Journal Cardiovascular Imaging, 24(8), pp. 1062–1071. Available at: https://doi.org/10.1093/ehjci/jead001.
Greutmann, Matthias et al. (2023) ‘Effect of phosphodiesterase-5 inhibition on SystEmic Right VEntricular size and function. A multicentre, double-blind, randomized, placebo-controlled trial: SERVE’, European Journal of Heart Failure, 25(7), pp. 1105–1114. Available at: https://doi.org/10.1002/ejhf.2924.
Greutmann, Matthias et al. (2023) ‘Effect of phosphodiesterase-5 inhibition on SystEmic Right VEntricular size and function. A multicentre, double-blind, randomized, placebo-controlled trial: SERVE’, European Journal of Heart Failure, 25(7), pp. 1105–1114. Available at: https://doi.org/10.1002/ejhf.2924.
Bieger V et al. (2023) ‘Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments’, Journal of Prosthetic Dentistry, 129(6), pp. 939–945. Available at: https://doi.org/10.1016/j.prosdent.2021.08.015.
Bieger V et al. (2023) ‘Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments’, Journal of Prosthetic Dentistry, 129(6), pp. 939–945. Available at: https://doi.org/10.1016/j.prosdent.2021.08.015.
Breit, Hanns-Christian et al. (2023) ‘Assessment of hepatic function employing hepatocyte specific contrast agent concentrations to multifactorially evaluate fibrotic remodeling’, Quantitative Imaging in Medicine and Surgery, 13(6). Available at: https://doi.org/10.21037/qims-22-884.
Breit, Hanns-Christian et al. (2023) ‘Assessment of hepatic function employing hepatocyte specific contrast agent concentrations to multifactorially evaluate fibrotic remodeling’, Quantitative Imaging in Medicine and Surgery, 13(6). Available at: https://doi.org/10.21037/qims-22-884.
Weikert T et al. (2023) ‘Automated lung cancer assessment on 18F-PET/CT using Retina U-Net and anatomical region segmentation’, European Radiology, 33(6), pp. 4270–4279. Available at: https://doi.org/10.1007/s00330-022-09332-y.
Weikert T et al. (2023) ‘Automated lung cancer assessment on 18F-PET/CT using Retina U-Net and anatomical region segmentation’, European Radiology, 33(6), pp. 4270–4279. Available at: https://doi.org/10.1007/s00330-022-09332-y.
Ilesan R.R. et al. (2023) ‘Comparison of Artificial Intelligence-Based Applications for Mandible Segmentation: From Established Platforms to In-House-Developed Software’, Bioengineering, 10(5). Available at: https://doi.org/10.3390/bioengineering10050604.
Ilesan R.R. et al. (2023) ‘Comparison of Artificial Intelligence-Based Applications for Mandible Segmentation: From Established Platforms to In-House-Developed Software’, Bioengineering, 10(5). Available at: https://doi.org/10.3390/bioengineering10050604.
Ismail, Tevfik F. et al. (2023) ‘Hypertensive Heart Disease—The Imaging Perspective’, Journal of Clinical Medicine, 12(9). Available at: https://doi.org/10.3390/jcm12093122.
Ismail, Tevfik F. et al. (2023) ‘Hypertensive Heart Disease—The Imaging Perspective’, Journal of Clinical Medicine, 12(9). Available at: https://doi.org/10.3390/jcm12093122.
Singh A.K. et al. (2023) ‘Is the Pre-Shaping of an Orbital Implant on a Patient-Specific 3D-Printed Model Advantageous Compared to Conventional Free-Hand Shaping? A Systematic Review and Meta-Analysis’, Journal of Clinical Medicine, 12(10). Available at: https://doi.org/10.3390/jcm12103426.
Singh A.K. et al. (2023) ‘Is the Pre-Shaping of an Orbital Implant on a Patient-Specific 3D-Printed Model Advantageous Compared to Conventional Free-Hand Shaping? A Systematic Review and Meta-Analysis’, Journal of Clinical Medicine, 12(10). Available at: https://doi.org/10.3390/jcm12103426.
Taheri Otaghsara Seyedeh Sahar et al. (2023) ‘Accuracy of dental implant placement using static versus dynamic computer-assisted implant surgery: An in vitro study’, Journal of Dentistry, 132. Available at: https://doi.org/10.1016/j.jdent.2023.104487.
Taheri Otaghsara Seyedeh Sahar et al. (2023) ‘Accuracy of dental implant placement using static versus dynamic computer-assisted implant surgery: An in vitro study’, Journal of Dentistry, 132. Available at: https://doi.org/10.1016/j.jdent.2023.104487.
Lüdi S et al. (2023) ‘Radiological, Clinical, and Functional Outcomes of Combined Dorsal and Volar Locking Plate Osteosynthesis for Complex Distal Radius Fractures’, Journal of Hand Surgery, 48(4), pp. 377–387. Available at: https://doi.org/10.1016/j.jhsa.2021.12.002.
Lüdi S et al. (2023) ‘Radiological, Clinical, and Functional Outcomes of Combined Dorsal and Volar Locking Plate Osteosynthesis for Complex Distal Radius Fractures’, Journal of Hand Surgery, 48(4), pp. 377–387. Available at: https://doi.org/10.1016/j.jhsa.2021.12.002.
Schulze-Zachau, Victor et al. (2023) ‘Estimation of differential renal function on routine abdominal imaging employing compressed-sensed contrast-enhanced MR: a feasibility study referenced against dynamic renal scintigraphy in patients with deteriorating renal retention parameters’, Abdominal Radiology, 48(4), pp. 1329–1339. Available at: https://doi.org/10.1007/s00261-023-03823-2.
Schulze-Zachau, Victor et al. (2023) ‘Estimation of differential renal function on routine abdominal imaging employing compressed-sensed contrast-enhanced MR: a feasibility study referenced against dynamic renal scintigraphy in patients with deteriorating renal retention parameters’, Abdominal Radiology, 48(4), pp. 1329–1339. Available at: https://doi.org/10.1007/s00261-023-03823-2.
Schulze-Zachau V et al. (2023) ‘Estimation of differential renal function on routine abdominal imaging employing compressed-sensed contrast-enhanced MR: a feasibility study referenced against dynamic renal scintigraphy in patients with deteriorating renal retention parameters’, Abdominal Radiology, 48(4), pp. 1329–1339. Available at: https://doi.org/10.1007/s00261-023-03823-2.
Schulze-Zachau V et al. (2023) ‘Estimation of differential renal function on routine abdominal imaging employing compressed-sensed contrast-enhanced MR: a feasibility study referenced against dynamic renal scintigraphy in patients with deteriorating renal retention parameters’, Abdominal Radiology, 48(4), pp. 1329–1339. Available at: https://doi.org/10.1007/s00261-023-03823-2.
Sharma N et al. (2023) ‘Can Steam Sterilization Affect the Accuracy of Point-of-Care 3D Printed Polyetheretherketone (PEEK) Customized Cranial Implants? An Investigative Analysis’, Journal of Clinical Medicine, 12(7). Available at: https://doi.org/10.3390/jcm12072495.
Sharma N et al. (2023) ‘Can Steam Sterilization Affect the Accuracy of Point-of-Care 3D Printed Polyetheretherketone (PEEK) Customized Cranial Implants? An Investigative Analysis’, Journal of Clinical Medicine, 12(7). Available at: https://doi.org/10.3390/jcm12072495.
Sommacal A et al. (2023) ‘Dental and Maxillofacial Emergency Algorithms in Swiss Emergency Departments’, Journal of Clinical Medicine, 12(8). Available at: https://doi.org/10.3390/jcm12082952.
Sommacal A et al. (2023) ‘Dental and Maxillofacial Emergency Algorithms in Swiss Emergency Departments’, Journal of Clinical Medicine, 12(8). Available at: https://doi.org/10.3390/jcm12082952.
Honigmann P et al. (2023) ‘Distance mapping in three-dimensional virtual surgical planning in hand, wrist and forearm surgery: a tool to avoid mistakes’, International Journal of Computer Assisted Radiology and Surgery, 18(3), pp. 565–574. Available at: https://doi.org/10.1007/s11548-022-02779-w.
Honigmann P et al. (2023) ‘Distance mapping in three-dimensional virtual surgical planning in hand, wrist and forearm surgery: a tool to avoid mistakes’, International Journal of Computer Assisted Radiology and Surgery, 18(3), pp. 565–574. Available at: https://doi.org/10.1007/s11548-022-02779-w.
Winkel DJ et al. (2023) ‘Multimodality imaging and 3D-printing of a thoraco-abdominal aortic aneurysm eroding into the spine’, Radiology Case Reports. Elsevier Inc., 18(2). Available at: https://doi.org/10.1016/j.radcr.2022.11.020.
Winkel DJ et al. (2023) ‘Multimodality imaging and 3D-printing of a thoraco-abdominal aortic aneurysm eroding into the spine’, Radiology Case Reports. Elsevier Inc., 18(2). Available at: https://doi.org/10.1016/j.radcr.2022.11.020.
Zarean P. et al. (2023) ‘Effect of Printing Parameters on Mechanical Performance of Material-Extrusion 3D-Printed PEEK Specimens at the Point-of-Care’, Applied Sciences (Switzerland), 13(3). Available at: https://doi.org/10.3390/app13031230.
Zarean P. et al. (2023) ‘Effect of Printing Parameters on Mechanical Performance of Material-Extrusion 3D-Printed PEEK Specimens at the Point-of-Care’, Applied Sciences (Switzerland), 13(3). Available at: https://doi.org/10.3390/app13031230.
Guerra, R.C. et al. (2023) ‘Finite Element Analysis of Low Profile Reconstruction Plates for Atrophic Mandibles: A Comparison of Novel 3D Grid and Conventional Plate Designs’. Research Square Platform LLC. Available at: https://doi.org/10.21203/rs.3.rs-2448008/v1.
Guerra, R.C. et al. (2023) ‘Finite Element Analysis of Low Profile Reconstruction Plates for Atrophic Mandibles: A Comparison of Novel 3D Grid and Conventional Plate Designs’. Research Square Platform LLC. Available at: https://doi.org/10.21203/rs.3.rs-2448008/v1.
Reid G et al. (2023) ‘Planning of graft size and 3D reconstruction using virtual reality technique in aortic valve reimplantation’, Frontiers in Cardiovascular Medicine, 9, p. 1064617. Available at: https://doi.org/10.3389/fcvm.2022.1064617.
Reid G et al. (2023) ‘Planning of graft size and 3D reconstruction using virtual reality technique in aortic valve reimplantation’, Frontiers in Cardiovascular Medicine, 9, p. 1064617. Available at: https://doi.org/10.3389/fcvm.2022.1064617.
Busch, Jeannette-Marie et al. (2023) ‘Emergency Presentations for Dizziness - Radiological Findings, Final Diagnoses, and Mortality’, International Journal of Clinical Practice, 2023. Available at: https://doi.org/10.1155/2023/7450009.
Busch, Jeannette-Marie et al. (2023) ‘Emergency Presentations for Dizziness - Radiological Findings, Final Diagnoses, and Mortality’, International Journal of Clinical Practice, 2023. Available at: https://doi.org/10.1155/2023/7450009.
Calderaro S et al. (2023) ‘Medication-Related Osteonecrosis of the Jaw: A Cross-Sectional Survey among Urologists in Switzerland, Germany, and Austria’, Journal of Clinical Medicine, 12(2). Available at: https://doi.org/10.3390/jcm12020638.
Calderaro S et al. (2023) ‘Medication-Related Osteonecrosis of the Jaw: A Cross-Sectional Survey among Urologists in Switzerland, Germany, and Austria’, Journal of Clinical Medicine, 12(2). Available at: https://doi.org/10.3390/jcm12020638.
Friedrich, P. et al. (2023) ‘Point Cloud Diffusion Models for Automatic Implant Generation’, in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vancouver, Canada: Springer Science and Business Media Deutschland GmbH (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)), pp. 112–122. Available at: https://doi.org/10.1007/978-3-031-43996-4_11.
Friedrich, P. et al. (2023) ‘Point Cloud Diffusion Models for Automatic Implant Generation’, in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vancouver, Canada: Springer Science and Business Media Deutschland GmbH (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)), pp. 112–122. Available at: https://doi.org/10.1007/978-3-031-43996-4_11.
Hefti, Rene, Eglin, Micha and Leiggener, Christoph (2023) ‘Was Schweizer Hausärztinnen und Hausärzte glauben und welchen Einfluss des Glaubens sie bei ihren Patientinnen und Patienten beobachten’, Spiritual Care, 12(3), pp. 219–229. Available at: https://doi.org/10.1515/spircare-2023-0008.
Hefti, Rene, Eglin, Micha and Leiggener, Christoph (2023) ‘Was Schweizer Hausärztinnen und Hausärzte glauben und welchen Einfluss des Glaubens sie bei ihren Patientinnen und Patienten beobachten’, Spiritual Care, 12(3), pp. 219–229. Available at: https://doi.org/10.1515/spircare-2023-0008.
Labus S et al. (2023) ‘A concurrent, deep learning–based computer-aided detection system for prostate multiparametric MRI: a performance study involving experienced and less-experienced radiologists’, European Radiology, 33(1), pp. 64–76. Available at: https://doi.org/10.1007/s00330-022-08978-y.
Labus S et al. (2023) ‘A concurrent, deep learning–based computer-aided detection system for prostate multiparametric MRI: a performance study involving experienced and less-experienced radiologists’, European Radiology, 33(1), pp. 64–76. Available at: https://doi.org/10.1007/s00330-022-08978-y.
Modgill, Vikas et al. (2023) ‘Knowledge Domain and Innovation Trends Concerning Medical 3D Printing for Craniomaxillofacial Surgery Applications: A 30-Year Bibliometric and Visualized Analysis’, Craniomaxillofacial Research and Innovation, 8. Available at: https://doi.org/10.1177/27528464231170964.
Modgill, Vikas et al. (2023) ‘Knowledge Domain and Innovation Trends Concerning Medical 3D Printing for Craniomaxillofacial Surgery Applications: A 30-Year Bibliometric and Visualized Analysis’, Craniomaxillofacial Research and Innovation, 8. Available at: https://doi.org/10.1177/27528464231170964.